The Essential Axe Buying Guide

The Essential Axe Buying Guide

What is the purpose of an axe?
An axe has three major functions. 1) Cutting 2) Splitting three) Shaping. An axe is a incredible device that can be used with nice impact, serving to you to do jobs faster and simpler than ever before. There's a little bit of a misconception on the market that axes haven’t moved with the instances (considerably understandable) especially when some styles haven’t modified for decades. Nonetheless, ‘axes’ is a really broad category which includes felling axes, tomahawks and hatchets. Every of these variations has a different function in mind. For example a felling axe is designed for felling (fairly apparent), but a hatchet is much smaller and designed for smaller tasks (still packs a giant punch although!) however nonetheless can be used for bigger duties if required.

Cutting Vs Splitting
The profile of the axe might be the primary element in deciding whether your axe will be good at slicing or splitting. How? Cutting profiles are much thinner than splitting profiles.

Why? The reducing profile is thinner because all the facility goes by the primary level of contact (when the cutting edge meets the wood), the thinner that point of contact the smaller space all the force is compelled into. This is the same action to shaving the place the blade is really thing to cut via the hairs.

With a splitting profile though, you’ll find that the profile is wider. This more ‘wedge’ shaped profile will cut up the wood into items as the log is pressured two different directions.

Something to note is that slicing usually goes throughout gains, whereas splitting goes by grains. When you have been to try and break up a log across grains you'd find it loads harder and less productive (that’s not even together with the quality of cut up).

Cutting Edge: Flat Vs Rounded
A few of chances are you'll be thinking that we had forgotten to say shaping axes within the previous section, however don’t fear we haven’t. It is merely more appropriate to speak about it here.

So though the profiles of chopping and splitting axes is completely different the slicing blade is the same style. Each of them may have rounded chopping edges. This is so that as small an space as possible makes preliminary contact with the wood. This makes for a a lot better penetration, subsequently a greater reduce or split.

However, with a shaping axe, you will see that it has a flatter reducing edge. This is in order that cuts are more even relatively than a deep lower/split. With a broad axe for instance you will often discover one side of the bit is flat and the opposite ramped. This allows for clean flat section to be cut out of the wood. You can get the flat side isn’t always on the one side of the axe, so be sure you get the proper side for you (normally depends upon your dominant hand/arm).

Bit: Single or Double
A few of you would slightly a single, some a double. Every has its personal merits and drawbacks which we'll try to make as clear as doable for you.

The single is most undoubtedly the most popular. Why? It’s easy and effective. All of the design goes into one single head. This single head is the one point of energy switch from you to the wood being chopped. On single bit axes, you’ll often discover that the poll has been hardened in order that it may be used as an improvised hammer. With some other designs like within the tomahawk information, you’ll additionally see another variations made to the poll for additional uses.

The double bit axes is less frequent, yet still has a number of advantages should you prefer them. The primary advantage appears at the balance offered due to the normally symmetrical(ish) head. You’ll also discover (if not it’s price looking into changing) that both heads are ground differently. Why? Well like several knife, different grinds imply the blade might be better suited to different tasks. An instance of this is a splitting and shaping innovative or profiles for chopping and splitting.

Deal with Size
You’ll find an enormous range of different sized axes from the small to the huge. Very like how head shape is different, handle measurement additionally makes an enormous distinction depending in your intended uses for it.

Axes dimension ranges from small ‘pocket’ axes (often 30cm handle length) to hatchets (45 cm or so) up to felling axes (roughly 60cm handles). Then you have got gransfors axes like tomahawks and throwing axes which are available in an entire array of sizes.

Bigger handle length tends to mean more power is generated therefore higher for larger tasks where precision isn’t essential. If you want a axe with more management and less power then go smaller. Measurement isn’t everything, no one will decide you for having a smaller axe.

Chi siamo

Ergoproject Plus è una società che si occupa di disabilità e tecnologie, di formazione aziendale finanziata e offre consulenze nell'ambito della sicurezza sul lavoro,
applicando a tutte le sue aree di competenza un approccio ergonomico centrato sull’utente.


Ergoproject Plus Srl
Via Andrea Barbazza 118
00168, Roma
P.IVA – C.F. 14724611000
C.S.I.V. 10.000

Tel/Fax 06.64467005

Certificazione ISO

BV Certification

Certificazione di qualità ISO 9001:2008,
settori EA di attività 35 e 37

Questo sito fa uso di cookie per migliorare l’esperienza di navigazione degli utenti e per raccogliere informazioni sull’utilizzo del sito stesso. Proseguendo nella navigazione si accetta l’uso dei cookie; in caso contrario è possibile abbandonare il sito.